The services offered by Inline Exhibition Stand Manufacturers in India enable exhibitors to have a professional and practical presence without the space and complexity of having an island stand. Exhibits Expo designs, manufactures and produces inline exhibition stands in trade shows, exhibitions and business events with a range of options based on the booth size, branding needs and budget. You may be interested in a simple shell scheme upgrade or something more tailored, such as an inline booth, but it is all about a visitor space full of usefulness and a clear brand message.
This page details the major factors to consider in planning an inline or linear booth, such as shell scheme terminology, popular booth sizes, design alternatives, exhibition regulations and the aspects that affect cost. If an exhibitor has an event to plan in India, it can be helpful to learn about these options early, and it becomes easier to brief a stand partner and compare the appropriate options.
Typical inline size
Open side
Common height limit
To be noticed
Small stands are where scope creep hurts most, because there is no budget to absorb it. All eight items are inside the figure you approve.
Your hall’s inline limit read from the exhibitor manual before any drawing starts.
Rendered from the aisle, at eye level, at walking distance — the only view that matters on an inline stand.
The single plane that does all the work, drawn against a four-second read rather than a close inspection.
Built from bare floor, or graphics and fittings applied over the organiser’s shell scheme.
Panel or fabric, printed to the shell dimensions your organiser publishes rather than to assumed sizes.
The single largest improvement available on a small stand, and the one most often omitted.
Somewhere to stand, somewhere to put bags and coats. Both matter more at 9 sqm than at 90.
Built and handed over ready to trade. On shell upgrades this is usually a single build-up day.
A stand contractor is easy to judge on one job. These clients judged us and booked the next one — across different countries, venues and build regulations
A shell scheme upgrade takes two to three weeks. A built inline stand runs the same six stages as any project, compressed by its size.
Each of these started as a blank floor plan. Photographs are from the show floor, not renders.
The Big 5 Exhibition 2019 · Dubai UAE
The Big 5 Exhibition 2019 · Dubai UAE
Label Expo 2019 · Brussels Belgium
Label Expo 2019 · Brussels Belgium
Korea Build 2019 · Seoul South Korea
Automechanika 2014 · Dubai UAE
Five factors, and on small stands the fifth surprises people more than the first four combined.
| Variable | What it changes | How to reduce it |
|---|---|---|
| Shell upgrade or built stand | Upgrading the organiser's shell is far cheaper and often delivers most of the visible gain. | Try the upgrade route first at 9 sqm unless you need enclosed storage or a specific height. |
| Frontage width | Three metres, six or nine. Graphics, lighting and counter all scale with the frontage rather than the depth. | Spend on the frontage and leave the rear third simple. Nobody photographs it. |
| Height allowed | A 4 metre rear wall costs more than a 2.5 metre one and is visible from much further down the aisle. | Check what your hall permits before assuming either. It varies by show. |
| Lighting | Track and spot lighting on the frontage. The single highest-return line on a small stand. | Never the item to cut. Reduce graphics area before reducing light. |
| Freight | On a 9 sqm stand shipped internationally, moving it can cost more than making it. | Ask about a portable system or local production. We will tell you which is cheaper for your show. |
For a first-time exhibitor at 9 sqm, shell scheme plus a good upgrade is almost always better value. The structure comes with the space, and the money goes entirely into what people actually see — graphics, lighting, counter and floor.
Space only becomes worth it when you need enclosed storage, a height the shell cannot give you, or a structure you intend to reuse across several shows. At 18 sqm and above that case gets stronger.
The decision is made when you book the space, not afterwards, so it is worth asking us before you sign the organiser's contract rather than after. It costs nothing and it occasionally saves a great deal.
Everything exhibitors ask us before they commit — including the questions where the honest answer is that we are not the right supplier for you.
An inline booth is typically an open booth that has one side, and other booths are found on the other sides. The front is open to the aisle and is usually the main visitor entrance.
An inline booth is typically open on one side, whereas an island booth is such that there is significantly more access by visitors around the perimeter. The layouts of islands tend to give more chances to move around and see things but demand another way of designing and space planning.
An inline booth tends to have a single open side. A corner booth is usually placed on the end of a row and has two open sides, which gives the booth more frontage and may give it a larger view of the aisles.
The shell scheme usually consists of a simple stall format set up by the organiser under the package of the event. Space-only allocation is typically the floor area without presuming the same standard stall format. The organiser will have to confirm the specific inclusions and construction requirements.
Yes, booth height and construction regulations are typical of exhibitions, although not universal. Different requirements may depend on the venue, the organiser of the event, the hall, the location of the stand, and the approved construction system. Exhibitors need to verify the existing trade show booth height regulations and technical manual prior to a design. The planning process should include any approvals needed.
Tell us the show, your stand size and how many sides are open. We come back with a rendered concept and an honest cost band — before you have committed to anything.
